Answers are grounded in this paper and cite their sources.
We present a detailed performance study of a resistive PICOSEC Micromegas detector prototype, tested under highly energetic muon beam of 150 GeV/c at the CERN SPS H4 beam line. This work provides a proof of concept for the use of resistive layer technology in gaseous timing detectors, demonstrating that robustness can be improved without compromising the excellent timing performance of PICOSEC Micromegas. Primary objective is to establish and validate a comprehensive analysis framework for timing and spatial performance evaluation, using a 10 MΩ/□ resistive-plane prototype as the reference configuration. Using this framework the 10 MΩ/□ prototype achieved a timing resolution of 22.9 ± 0.2 ps in single-pad events, and a core spatial resolution of 1.195 ± 0.003 mm (X) and 1.197 ± 0.003 mm (Y), while charge sharing across multiple pads enabled combined timing resolutions below 28 ps. An additional prototype featuring a lower resistivity layer (200 kΩ/□) was tested under identical conditions to assess the impact of resistivity on charge transport, timing, and spatial performance, reaching a timing resolution of 31.6 ± 0.3 ps. Minor systematic spatial variations observed in the combined Signal Arrival Time (SAT) map are attributed to photocathode non-parallelism and readout PCB planarity imperfections, which are known to induce non-uniform drift fields affecting timing homogeneity. These studies benchmark the potential of resistive layers for gaseous timing detectors and provide a foundation for scalable designs with optimized timing and spatial resolution across diverse experimental applications.
No takes yet. Share an insight, caveat, or question.
Kallitsopoulou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: