Answers are grounded in this paper and cite their sources.
Irrigation canal linings in Kazakhstan face freeze-thaw cycling, sulfate-bearing water, and abrasive sediment flow, while national programs to rehabilitate more than 14,000 km of canals create sustained demand for lower-clinker concrete. This study computationally designs a cement-reduced ternary binder (CEM I 42.5N, Ekibastuz low-calcium fly ash, and DSF-95 silica fume, 70:20:10 by mass) that replaces 30% of the cement in a plant control mixture (280 vs 400 kg/m3) while preserving total binder content, paste volume, and aggregate skeleton. The design combines particle-packing simulation, a modified Bolomey model calibrated on the measured plant control (R28 = 44.5 MPa), and Powers-model porosity. Experimentally, a laboratory composition with the same ternary binder proportions was cast and tested in 100 mm cubes, yielding a measured R28 of 52.8 MPa versus 52.6 MPa predicted (0.4% deviation); its fracture surface was examined by scanning electron microscopy. The predicted ternary mixture reaches R28 = 55.2 MPa (+24% over the control, attributable to the lower water content and the assumed packing bonus; mean-based class B40) with a 28-day capillary porosity of 0.160 versus 0.223 (−28%), lowering the paste-permeability index to about one-third of the control’s, and utilizes 120 kg of industrial by-products per cubic meter while avoiding at least 72 kg of binder-related CO2. The GOST durability grades (frost resistance, water impermeability, abrasion, sulfate resistance) are deliberately not predicted and await the ongoing laboratory campaign; the work is therefore a computational mix-design study with a single measured verification composition.
No takes yet. Share an insight, caveat, or question.
Baikhojaeva et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: