Answers are grounded in this paper and cite their sources.
This paper presents a computed Darrieus rotor design, rated at 418 kilowatts, on a single stated operating principle: straight or curved blades mounted parallel to a vertical shaft sweep a rectangular area through the wind; each blade generates lift whose tangential component drives the rotor on both the upwind and downwind passes, with no yaw mechanism because the rotor accepts wind from any direction. The system studied is a rotor 34 metres in diameter and 40 metres tall at a rated wind speed of 12 metres per second, with three blades of 1.1-metre chord, power coefficient 0.34 and tip-speed ratio 4.2. The target quantity is net electrical output from the computed swept area, stream power and rotor power, with solidity, thrust and an estimated starting torque printed because low starting torque is this layout's known weakness. For the Darrieus rotor, the net output is 418 kilowatts, and the annual yield is 0.99 gigawatt-hours, at a capacity factor of 0.27. Stream power through the swept rectangle is 1439 kilowatts. Rotor solidity is 0.097. Rotor thrust is 90.0 kilonewtons. Estimated starting torque is 41,269 newton metres. This is a computed study with a civilian energy purpose and no targeting or weapon application; every figure in it is simulated, not measured.
No takes yet. Share an insight, caveat, or question.
William Alexander Aldred (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: