Answers are grounded in this paper and cite their sources.
Design blueprint derived from the source paper (DOI 10.5281/zenodo.24239760): This paper presents a computed Savonius rotor design, rated at 3.08 kilowatts, on a single stated operating principle: two or three curved scoops catch the wind by drag rather than lift: pressure on the concave face of the advancing scoop exceeds the drag on the convex returning scoop, and the difference turns the shaft slowly with high torque at a power coefficient far below lift machines. The system studied is a two-scoop rotor 6 metres in diameter and 9 metres tall at a rated wind speed of 9 metres per second, with power coefficient 0.16, tip-speed ratio near unity and an overlap ratio of 0.18. The target quantity is net electrical output from the computed swept area and stream power at the drag rotor's characteristic low coefficient, with starting torque printed because reliable self-starting at any wind angle is the reason this machine exists. For the Savonius rotor, the net output is 3.08 kilowatts, and the annual yield is 5.13 megawatt-hours, at a capacity factor of 0.19. Stream power through the swept area is 24.1 kilowatts. Rotor thrust is 2.41 kilonewtons. Estimated starting torque is 1143 newton metres. Scoop overlap ratio is 0.18. Its purpose is civilian energy supply only, with no targeting or weapon application of any kind, and all of its figures are simulated, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian wind energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
No takes yet. Share an insight, caveat, or question.
William Alexander Aldred (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: