Answers are grounded in this paper and cite their sources.
Glass fiber-reinforced polymer (GFRP) bars are increasingly used as internal concrete reinforcement because of their corrosion resistance and non-magnetic properties. However, their lower stiffness, brittle behavior, diverse surface treatment options, and different bond mechanisms compared with steel bars complicate the design of anchorages, lap splices and detailing in general. This paper critically reviews the bond behavior of GFRP bars and compares the corresponding provisions of major international design guidelines. A structured literature search was conducted using the Web of Science database, from which 60 relevant publications were selected for detailed assessment. The review covers bond mechanisms and failure modes, bond stress–slip models, the effects of surface treatment, concrete properties and confinement, development and lap-splice length, bent-bar detailing, and long-term bond performance. The findings show that surface properties are among the most influential parameters governing bond strength, but their effects are not adequately represented by the limited surface coefficients used in current design provisions. Therefore existing development-length equations are generally conservative, particularly for modern GFRP products and well-confined reinforcement, although unconservative predictions may occur under certain conditions. Most guidelines rely on empirical average bond-stress concepts and do not explicitly account for non-uniform bond-stress distributions. A reason for this excessive conservatism is insufficient knowledge about the bond strength reduction due to environmental exposure, sustained and long-term loading. Research priorities are therefore identified for surface characterization, confinement, non-uniform bond models, environmental exposure, sustained loading, and bent-bar detailing.
No takes yet. Share an insight, caveat, or question.
Szinvai et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: