Answers are grounded in this paper and cite their sources.
This article describes saturation‐dependent, pore‐level heat transfer coefficient measurements for water in the boiling regime within conical pores and considers the applicability of a modified thin‐film formulation for modeling this scenario. Measurements of transient heat transfer for planar arrays of conical pores with opening diameter and depth are used to provide description of pore level performance. For saturations from 0.1 to 0.7, base averaged heat transfer coefficients are measured ranging from approximately , respectively. The heat transfer coefficients are found to be relatively insensitive to applied heat fluxes ranging from 16 to . While analytical thin‐film models are well established for cylindrical capillaries and triangular grooves, their extension to conical pores under transient, saturation‐dependent boiling conditions has not been studied extensively. Existing analytical models for cylindrical capillaries are adapted to represent the conical pore and compared with measurements. By incorporating experimentally measured temperatures at the heat source and dynamically adjusting boundary conditions at the liquid–substrate interface, the model accounts for variations in conductive resistance and superheat as a function of saturation level of the wetting phase. Both the models and experiments show strong correlation of heat transfer with meniscus perimeter. However, the model generally predicts higher heat transfer with stronger saturation dependence. Potential geometric deviations introduced during fabrication, along with limitations in the experimental measurements and the thin‐film model, are considered for their contribution to the observed discrepancies. These findings provide insights for optimizing capillary‐driven thermal systems and enable rapid pore‐level heat transfer predictions for use in pore network models of high heat flux cooling applications.
No takes yet. Share an insight, caveat, or question.
Özkazanç et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: