Answers are grounded in this paper and cite their sources.
Battery-driven passenger ferries offer meaningful environmental benefits over conventional propulsion, yet the large-scale lithium-ion systems that make this possible bring with them a set of safety challenges that are still poorly understood in the maritime context. Thermal runaway, flammable gas generation, and the risk of deflagration in confined shipboard compartments cannot be adequately evaluated with the static probability–consequence models that remain standard practice in maritime safety engineering. We address this gap by developing a physics-informed framework for dynamic risk assessment of battery-driven ferry systems. The work begins with a multi-physics model of thermal runaway behavior, gas generation, and compartment accumulation dynamics, then uses those physical insights to construct a time-dependent risk formulation that explicitly tracks hazard escalation and consequence growth. A time-to-unsafe condition (TUC) metric is introduced to measure whether detection and mitigation systems can realistically outpace hazard development. From this foundation we build an integrated safety-case framework that brings together hazard identification, functional and failure analysis, barrier modeling, and quantitative risk evaluation. Fire and gas modeling is embedded throughout to assess ventilation adequacy, flammability thresholds, and detection performance under realistic fault conditions. The full framework is implemented as a coupled-ODE simulation covering five scenarios: one nominal operating case, three single- and combined-degradation failure cases, and one active-mitigation case; a Monte Carlo uncertainty analysis with N = 200 samples quantifies the robustness of the conclusions, and the model is validated against published lithium-ion cell-level data and checked for order-of-magnitude consistency with the documented MF Ytterøyningen maritime incident and an in-service 5 MWh ferry battery installation. The resulting methodology links physical system behavior directly to risk metrics, enabling simulation-based design validation, and translates the analytical results into concrete engineering guidance on ventilation sizing, detection latency limits, and barrier independence requirements. The framework is intended to support both safety-case development and risk-informed design for the next generation of electrified vessels.
No takes yet. Share an insight, caveat, or question.
Rahimpour et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: