Answers are grounded in this paper and cite their sources.
Aiming at the problems that traditional design methods tend to be conservative in ultra-large-diameter pipe jacking projects and the research on the stress mechanism of fabricated pipe segments is insufficient, this paper systematically carries out research on construction mechanical calculation and simulation of large-diameter fabricated circular pipe jacking. Firstly, the complete three-dimensional geometric equations in polar coordinates and three-direction force equilibrium equations in cylindrical coordinate system are derived, and the governing equations under axisymmetric conditions are obtained through simplification. Secondly, the axisymmetric stress compatibility equation is established, the conservation conclusion of the first stress invariant is derived, and the Lame analytical solution of thick-walled cylinder is obtained. On this basis, an elastoplastic theoretical model of cavity expansion is constructed combined with the Mohr-Coulomb yield criterion, and the stress distribution laws of elastic zone and plastic zone as well as the calculation method of plastic zone radius are clarified. Finally, taking an 11m-diameter pipe jacking project as an example, theoretical calculation and ANSYS numerical simulation verification are carried out, and the results are compared with those calculated by T/CECS 143–2022 standard. The research shows that the radius of the plastic zone of soil around the pipe is about 1.2 times the outer diameter of the pipe under the steady-state condition of straight pipe jacking. The error between the calculation results of the elastoplastic analytical model and field measured data is between 0.7% and 10.8%, and its accuracy is significantly higher than that of the traditional standard method. The existing design standard for trench-constructed pipelines has essential defects when applied to pipe jacking projects, which will underestimate the lateral earth pressure and overestimate the top earth pressure of the pipe. The research results can provide a theoretical basis for the structural design and construction control of large-diameter fabricated pipe jacking.
No takes yet. Share an insight, caveat, or question.
ZHANG et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: