Answers are grounded in this paper and cite their sources.
Polyimide (PI) is widely used as dielectric materials in electronic devices and power systems because of its excellent heat resistance and mechanical stability. However, the intrinsically low dielectric constant of conventional PI limits its practical application in high-energy-density dielectric capacitors. In this study, triaminocycloboroxane (TABO) was first synthesized via dehydration condensation of 3-aminophenylboronic acid (3-ABBA). TABO was then reacted with 3,3',4,4'-biphenyltetracarboxylic dianhydride (BPDA) via an amine-anhydride ring-opening addition reaction to prepare a boron-containing hard-segment polyamic acid prepolymer, which designated as PAA-a. Separately, a soft-segment polyamic acid prepolymer, designated as PAA-b, was synthesized by reacting 4,4'-diaminodiphenyl ether (ODA) with 4,4'-oxydiphthalic dianhydride (ODPA) through the same method. PAA-a and PAA-b were coupled through ring-opening polyaddition to form a soft-hard segmented polyamic acid (PAA). The resulting PAA was cast into films, dried, and thermally imidized to obtain boroxine-containing PI films. The effects of the reactant ratio on soft-hard segmented structure, dielectric, thermal, wetting and mechanical properties of the PI films were studied. The results showed that raising the molar ratio of TABO to ODA, the hard-segment content of as-prepared PI films increased, and the dielectric and thermal properties were improved. When the molar ratio of TABO to ODA was 2:27, the PI film exhibited a high dielectric constant of 5.08 at 100 kHz and a maximum decomposition rate temperature of 630°C. These results demonstrate its potential as a high dielectric material for high-energy-density capacitors.
No takes yet. Share an insight, caveat, or question.
Ge et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: