Answers are grounded in this paper and cite their sources.
Crushing and grinding must provide sufficient mineral liberation while limiting electricity consumption, unnecessary fines generation, and the treatment of barren material. This narrative review examines energy-efficient comminution technologies, ore pretreatments, and circuit optimization using experimental, pilot-scale, industrial, and modelling studies available by 12 November 2026. High-pressure grinding rolls, vertical roller mills, and stirred media mills offer different opportunities according to feed characteristics, required product size, and circuit configuration. Microwave irradiation, conventional heating, high-voltage pulses, and ultrasound can alter breakage behaviour, but improvements in grindability do not necessarily produce a positive process energy balance. Quantitative comparisons are therefore interpreted using their original energy boundaries, product specifications, and evidence scales. A copper-ore vertical roller mill study reported an 18% specific-energy reduction, whereas pilot microwave work supported simulated comminution reductions of up to 9% at a specified plant grind. These outcomes cannot be ranked directly. Classification, grinding-media selection, early gangue rejection, and coordinated process control can reduce avoidable grinding and complement equipment changes. The most defensible selection criterion is the energy required to obtain a metallurgically acceptable product from a defined quantity of original feed, including pretreatment and auxiliary loads. Wider adoption of emerging technologies requires continuous trials, representative ore variability, and transparent mass, energy, and recovery balances.
No takes yet. Share an insight, caveat, or question.
Soares et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: