Answers are grounded in this paper and cite their sources.
Chemical conditioning can alter particle associations in bauxite suspensions and consequently affect mass partitioning during magnetic separation. This study investigated sodium hexametaphosphate (SHMP), sodium metasilicate (SMT), and sodium silicate (SS) using mineralogical and particle size characterization, zeta potential measurements, dispersion tests, and nonmagnetic mass recovery at magnetic flux densities from 0.2 to 1.2 T. The identified phases were gibbsite, kaolinite, goethite, hematite, and anatase. The zeta potential decreased from +20.2 mV at pH 2 to −42.9 mV at pH 12, with a near-zero region at pH 8 to 9. The degree of dispersion increased from 18% without reagent to 46%, 41%, and 38% at 3000 g/t of SHMP, SMT, and SS, respectively. However, the reagent ranking for dispersion did not consistently predict nonmagnetic mass recovery. At 0.6 T, 600 g/t SHMP produced 90.8% recovery, whereas SMT and SS at the same dosage produced 87.6% and 89.0%. At 1.2 T, the highest reported recovery was 79.8% with 2400 g/t SMT, compared with 70.4% for the control; SS converged to 75.1% across the three dosages. These results indicate that chemical dispersion and magnetic capture respond jointly to reagent dosage, mineral associations, and field conditions. The findings establish changes in nonmagnetic mass yield, while product assays remain necessary to determine alumina recovery and iron rejection.
No takes yet. Share an insight, caveat, or question.
Fonseca et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: