Answers are grounded in this paper and cite their sources.
Microwave susceptors in the form of powder are prone to agglomeration, uneven heating, and airborne handling hazards, which limit the consistency of microwave-welded thermoplastic joints. We previously introduced a silicon carbide nanowhisker (SiCNW)/poly(methyl methacrylate) (PMMA) nanocomposite thin film as an alternative susceptor and showed how SiCNW loading and heating duration affect joint performance. In this study, the SiCNW loading and heating duration were fixed at the previously optimized 40 wt% and 50 s. We examined how microwave power and clamping pressure govern the mechanical properties and interfacial microstructure of polypropylene (PP) joints welded with this thin-film susceptor. Tensile strength and flexural modulus both increased with microwave power, while flexural strength decreased. Tensile strength rose as clamping pressure increased from 364.93 Pa to 729.86 Pa, then declined at 1094.80 Pa and 1459.73 Pa as the welded area thinned under excess clamping pressure. At its best combination of parameters, the thin-film susceptor produced a 20.36% higher tensile strength than joints welded with SiCNW powder, which we attribute to more uniform heating and the SiCNW/PP nanocomposite layer formed at the joining interface. Cross-sectional SEM-EDX analysis confirmed that this layer thickens with increasing microwave power and clamping pressure, which matches the trends observed in the mechanical properties. These findings complete our earlier work on this susceptor system and support its use as an adhesive-free joining method for thermoplastics.
No takes yet. Share an insight, caveat, or question.
Foong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: