Answers are grounded in this paper and cite their sources.
Oxide/semiconductor interfaces play a critical role in determining polarization‐coupled switching in hafnium–zirconium oxide (HZO)‐based ferroelectric thin‐film transistors (FeTFTs). Herein, bottom‐gate HZO//indium tungsten oxide (IWO) FeTFTs are investigated to clarify how interfacial charge trapping at the /IWO interface influences program/erase switching and cycling stability. The fabricated devices exhibit stable n ‐type transistor characteristics and reversible threshold‐voltage modulation, while ferroelectric capacitor (FeCAP) measurements confirm voltage‐dependent polarization switching in the HZO‐based stack. The program and erase operations exhibit asymmetric threshold‐voltage modulation, with a smaller positive threshold‐voltage shift during erase than the negative shift during program operation. Under repeated program/erase cycling, both the programmed and erased threshold voltages drift toward positive gate bias, resulting in a reduced memory window. Increasing the assumed effective /IWO interfacial trap density in TCAD qualitatively reproduces these trends, suggesting that interfacial trapping may contribute to the degradation. Changes in polarization switching and oxide‐trap states within the HZO/ stack may also play a role. These results provide an oxide‐channel‐specific interpretation of polarization–trap coupling and identify the /IWO interface as an important control point for polarization‐coupled switching and cycling stability in oxide‐channel FeTFT memory devices.
No takes yet. Share an insight, caveat, or question.
Park et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: