Answers are grounded in this paper and cite their sources.
Lattice structures are porous cellular materials characterized by an excellent strength-to-weight ratio. The wide range of controllable parameters — including unit-cell design, tessellation strategy, relative density, and material properties — offers extensive flexibility in tailoring mechanical behavior, enabling application-specific solutions for automotive, aerospace, and biomedical engineering. This study adopts a design-based approach in which arch-shaped struts are added to the conventional Body-Centered Cubic (BCC) lattice to enhance mechanical performance. Several arch configurations are investigated, encompassing arch type (concave and convex), arch angle (0°, 15°, 30°, 45°, and 60°), and arch diameter (1, 1.5, and 2 mm). All configurations were fabricated from polylactic acid (PLA) via fused deposition modeling (FDM) and subjected to compression testing to evaluate the influence of arch geometry on Young's modulus, maximum compressive force, energy absorption, and failure mechanisms. Results demonstrate that arch incorporation substantially affects both mechanical properties and failure behavior. The greatest enhancement in maximum compressive force relative to the BCC reference was recorded for a convex arch at 15° and 2 mm diameter, yielding a 1961% increase. Reducing the diameter to 1 mm decreased this improvement to 208%. Regarding Young's modulus, the effect of arch angle is more pronounced in concave configurations regardless of diameter. The influence of concave versus convex geometry on Young's modulus depends on the arch angle: a 34% improvement was observed transitioning from concave to convex at 15° and 2 mm diameter, while a substantially greater enhancement of 185% was recorded at 60° under the same geometric transition.
No takes yet. Share an insight, caveat, or question.
Elwasli et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: