Answers are grounded in this paper and cite their sources.
This study investigates the effect of arc count, the number of Schwarz Primitive (P) unit cells distributed around the circumference, on the mechanical response and energy absorption of hollow cylindrical TPMS structures. Five configurations (3, 5, 7, 9, and 11 arcs) were analyzed by finite element analysis, and the Arc 3 configuration was validated experimentally. Increasing the arc count from 3–11 raised the relative density from 0.196 to 0.268, the stiffness by 91.6%, and the effective modulus by 92.5%. The normalized modulus reached 54% to 75% of the axial upper bound, indicating predominantly axial load carrying with an efficiency that rose with arc count, and an empirical power law gave an exponent of 2.12 (R 2 = 0.993). All configurations entered the hardening region at 3.7–3.8% strain and showed no softening up to 13.25% strain. Specific energy absorption (SEA) rose by approximately 97.9% and toughness from 166 to 300 J/m 3 , with diminishing gains at higher arc counts. The force-response indicators, however, were non-monotonic: Arc 7 exhibited the highest behavior factor (1.16) and the lowest crush force efficiency (0.86), whereas Arc 3 showed the lowest behavior factor (1.07) and the highest crush force efficiency (0.93). The experimental response agreed with the simulation within 1% in force and stress at 5 mm and within 3.5% and 8.5% in SEA and toughness, respectively. Arc count is therefore an effective design variable for tailoring the stiffness and energy absorption of Schwarz-P cylinders, although gains in energy absorption and crushing-force uniformity do not necessarily occur together.
No takes yet. Share an insight, caveat, or question.
Sun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: