Answers are grounded in this paper and cite their sources.
Three-dimensional elastic-wave computed tomography depends on acquisition sampling, directional coverage, and target characteristics. This study examines their coupled effects using first-arrival modeling with the Fast Sweeping Method and inversion with the Simultaneous Iterative Reconstruction Technique. Cubic models with side lengths of 12 or 24 m were used to assess ray-set density, borehole configuration, excitation spacing, target size, velocity contrast, target position, and directional supplementation. Reconstruction was evaluated using the corrected recovery ratio, normalized maximum boundary offset, and relative velocity error. In the noise-free fixed-target comparisons, the largest gains occurred between sparse and moderate sampling. Excitation spacing no greater than half the target side length was associated with improved recovery metrics in these series, but identical ratios yielded different results across configurations. Targeted diagonal supplementation increased the corrected recovery ratio by 13.3% relative to the baseline, although its boundary offset increased. Reference-matrix analysis distinguished increased target illumination from improved global spectral properties. Threshold, traveltime-error, initial-model, and iteration-count tests showed that comparative advantages depend on the metric and test conditions. The results support a geometry–target framework for assessing acquisition design within the tested numerical settings, while not establishing universal sampling thresholds for heterogeneous field environments.
No takes yet. Share an insight, caveat, or question.
Zhengcai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: