Answers are grounded in this paper and cite their sources.
By incorporating a rigid DDSQ inorganic cage into a benzoxazine crosslinkable matrix, this work provides a hybrid system for short-duration high-temperature adhesion. The DDSQ-functionalized benzoxazine monomer (DDSQ-BZ) was synthesized via hydrosilylation of hydride-terminated double-decker silsesquioxane with eugenol to give DDSQ-OH, followed by Mannich condensation with formaldehyde and aniline. The DDSQ precursor structure was confirmed by single-crystal X-ray diffraction (R1 = 0.0625), and the final DDSQ-BZ monomer was verified by FTIR, 1H/13C/29Si NMR, and mass spectrometry. After stepwise curing to 200 °C, the resulting hybrid exhibited a Td5% of 389 °C and a char yield of 75.1% at 800 °C under nitrogen, which is 38.1 percentage points higher than that of neat DDSQ (37%) and 43.1 percentage points higher than that of the conventional B-a resin (32%). Lap-shear testing on iron substrates gave a joint strength of 1.4 MPa at room temperature. Two-dimensional infrared correlation spectroscopy indicated that OH···N hydrogen bonds form first during curing, followed by OH···π and OH···O interactions, consistent with hydrogen bonding contributing to room-temperature adhesion. In short-duration lap-shear tests, DDSQ-BZ retained joint strengths of 1.25 MPa at 300 °C and 1.00 MPa at 350 °C. These results indicate the potential of DDSQ-BZ for short-duration high-temperature bonding applications, while its long-term aging behavior under service conditions warrants further study.
No takes yet. Share an insight, caveat, or question.
Wu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: