Answers are grounded in this paper and cite their sources.
Hybrid steel–basalt fiber ultra-high-performance concrete (UHPC) was investigated at a constant total fiber volume fraction of 2%. A fiber-free reference, two mono-fiber mixtures, and three hybrid mixtures were tested. Mechanical tests included compression of 100 mm cubes and 40 mm × 40 mm loaded sections of prism halves, splitting tension, and flexure using two prism geometries. Actuator-based load–displacement curves were integrated to derive comparative pre- and post-peak energy indices. Nondestructive testing, two-dimensional visible-void analysis, SEM–EDS, empirical regressions, and a bootstrap-based hybrid-effect index complemented the results. Steel fibers did not improve the compressive strength of 100 mm cubes but markedly enhanced post-peak response. The 2ST mixture increased splitting tensile strength by 74.8% and total splitting-test energy by 218% relative to the reference. The 1.5ST + 0.5B mixture provided the most favorable hybrid splitting response. Fresh-state air content described variation in UPV (R2 = 0.752) and dynamic modulus (R2 = 0.874), whereas coarse section-visible void area did not. No hybrid mixture showed statistically supported positive synergy: 1ST + 1B was antagonistic in splitting strength and pre-peak energy, and all hybrids were antagonistic in smaller flexural prisms. The steel-to-basalt ratio should be optimized for the target response rather than selected on the assumption of intrinsic synergy.
No takes yet. Share an insight, caveat, or question.
Błaszczyk et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: