Answers are grounded in this paper and cite their sources.
Biodiesel–diesel blends provide a renewable alternative to petroleum diesel for compression-ignition (CI) engines; however, their oxygen content, fuel properties, combustion phasing, and local high-temperature conditions can influence nitrogen oxides (NOₓ) emissions. This review critically examines NOₓ formation and mitigation in biodiesel–diesel-fueled CI engines, focusing on exhaust gas recirculation (EGR), fuel additives, and water-based techniques. EGR reduces NOₓ primarily through oxygen dilution and increased charge heat capacity, thereby lowering peak combustion temperature. Fuel additives modify fuel properties, ignition characteristics, combustion phasing, heat release, and reaction kinetics, while water-based techniques, including direct water injection and water–fuel emulsions, suppress NOₓ mainly through evaporative cooling and latent heat absorption. Emulsification can also improve spray breakup and fuel–air mixing under suitable conditions. No single mitigation approach provides universally superior performance, as NOₓ reduction depends on biodiesel composition, blend ratio, additive concentration, water content, EGR rate, injection strategy, and engine operating conditions. Hybrid strategies can enhance NOₓ reduction but may introduce trade-offs involving smoke/particulate matter (PM), CO, HC, fuel consumption, thermal efficiency, and system complexity. This review summarizes NOₓ formation mechanisms, mitigation performance, associated trade-offs, and research challenges for practical NOₓ control in biodiesel-fueled CI engines.
No takes yet. Share an insight, caveat, or question.
M. Roy (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: