Answers are grounded in this paper and cite their sources.
The influence of electrode microstructure on the electrochemical role of a mixed-conducting active interlayer (Ce 0.8 Pr 0.2 O 2- δ + 2 mol% cobalt oxide – CPO + Co) was investigated using misfit calcium cobaltite [Ca 2 CoO 3- δ ] 0.62 [CoO 2 ] (CCO) oxygen electrodes for solid oxide cells. CCO powders prepared by solid-state reaction (SSR-CCO) and electrospinning (ES-CCO) were deposited onto dense Ce 0.9 Gd 0.1 O 2- δ electrolytes containing CPO + Co interlayers. The ES-CCO electrode developed a finer platelet-like microstructure and a larger CCO/CPO + Co interfacial area, resulting in a lower polarisation resistance (∼0.5 Ω cm 2 vs. ∼0.8 Ω cm 2 at 700 °C in O 2 ) and a reduced apparent activation energy (1.05 ± 0.02 eV vs. 1.23 ± 0.03 eV). Impedance measurements as a function of oxygen partial pressure, supported by distribution function of relaxation times (DFRT) analysis, revealed a transition from a finite-length Warburg response in the SSR-CCO|CPO + Co electrode to a Gerischer-type reaction-diffusion response in the ES-CCO|CPO + Co electrode. These findings demonstrate that the electrochemical role of the CPO + Co interlayer is governed by the surrounding CCO microstructure, evolving from a rapidly equilibrated oxygen-exchange boundary in the SSR case to a high-conductivity ionic collector supporting distributed reaction-diffusion within the CCO network in the ES case.
No takes yet. Share an insight, caveat, or question.
Araújo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: