Answers are grounded in this paper and cite their sources.
The pores of tight sandstone reservoirs play an important role in hydrocarbon production, and identifying pivotal microscopic parameters that dominate permeability and fluid mobility still merits extensive research attention. In this study, eight tight sandstone samples from the YanChang Formation of the Ordos Basin, China, were analysed. By calibration using the relatively reliable information obtained from nuclear magnetic resonance (NMR) and constant‐rate mercury intrusion (CRMI) experiments, the distribution of throat radii and the pore spaces controlled by throats of different radii were established. The throat radius at which pores initially control volume and the throat radius that corresponds to maximum pore volume were 0.19–0.74 and 0.65–8.45 μm, respectively. Volume (porosity) parameters, including the throat volume‐controlling pores and the throat volume‐not‐controlling pores were 0.158–2.09 and 1.357–5.94 μm, were also obtained. The NMR response of fluids within the same pore space changes with the saturation state, indicating that repeated centrifugation experiments cannot determine the distribution of movable fluids controlled by different throat‐radius ranges. Correlation analysis indicates that both the volume and radius of throats controlling pores play a key role in permeability. Gas permeability ( R 2 = 0.758) is more strongly affected by throat radius than liquid permeability ( R 2 = 0.6718). A higher illite content in clay minerals leads to a larger discrepancy between gas and liquid permeability. Calcite and zeolite cementation are the main causes of permeability reduction in some samples. Movable fluids are mainly enriched in the throats controlling pores and the pore spaces governed by them. Higher illite content is associated with lower movable fluid saturation, with a significant correlation. Finally, two predictive equations for movable fluid porosity were established based on liquid permeability ( m = 5.0936 K l 0.2788 ), and gas permeability combined with illite content ( m = log K g −0.141 C Illite + 4.498).
No takes yet. Share an insight, caveat, or question.
Chen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: