Answers are grounded in this paper and cite their sources.
The gear transmission system is a critical component enabling high-speed operation of 400 km/h high-speed electric multiple units. Acquiring the vibration characteristics of transmission system components under service conditions and reproducing them on a test rig is crucial for the development of advanced gear systems and safety monitoring. This study aims to iteratively determine the axle-box excitation on a test rig based on field measurements of the gearbox housing response, ensuring that the test rig response closely matches the on-track results, thereby establishing a response-equivalent vibration environment in which the gearbox-housing response on the test rig approaches the corresponding on-track response within the investigated frequency range. Firstly, a response-oriented vibration-environment reproduction framework is developed to achieve response equivalence between the bench and on-track conditions. Within this framework, a frequency response function-based iterative updating procedure is employed to determine the equivalent axle-box excitation for the bench test. A dynamic model of the double-helical gear transmission system is then established to evaluate the feasibility and convergence of the proposed framework. After multiple iterations, the root mean square (RMS) value of the vertical acceleration at the reference point fully matches the on-track measurements, with the error in the acceleration power spectral density reduced to 1.9%, validating the method's effectiveness. Secondly, verification tests are conducted on a wheel–rail excitation test rig. The RMS error of the vertical acceleration at the reference point is reduced from 84.7% to 1.4%, with the power spectral density error reduced from 224.6% to 8.5%. Finally, the vibration distribution characteristics of the gearbox housing, together with the modal displacement shapes and frequency spectra, confirm that the housing exhibits elastic vibration dominated by the seventh mode. Based on these results, a preliminary sensor placement recommendation is proposed for future on-track monitoring of gearbox vibration.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: