Answers are grounded in this paper and cite their sources.
This study investigates the shear behavior of prestressed concrete girders reinforced with high-strength steel (Grade 100) lacking a yield plateau, in comparison with conventional reinforcement (Grade 60) with a well-defined yield plateau. Eight full-scale prestressed girder experiments were conducted with different variables, including shear reinforcement strength and spacing, shear span–to-depth ratio, and prestressing strand layout. The results showed that girders with Grade 100 reinforcement, despite having wider stirrup spacing, exhibited similar shear capacities to those with Grade 60 reinforcement. Initial diagonal cracking was influenced by the loading region but not by reinforcement type or layout. Although specimens with Grade 100 stirrups displayed slightly greater diagonal crack widths due to lower axial stiffness of the shear reinforcement, all crack widths remained within serviceability limits. Strain measurements indicated more gradual strain development in Grade 100 stirrups, attributed to the absence of a yield plateau, which promoted smoother stress redistribution and reduced local strain concentration. These findings demonstrate that high-strength shear reinforcement can be used effectively in prestressed girders without compromising structural performance or serviceability, indicating that current code-imposed yield-strength limits for shear reinforcement may be conservative for prestressed members. This experimental study provides experimental evidence supporting the safe and efficient use of high-strength reinforcement to improve constructability and detailing economy in modern concrete girders.
No takes yet. Share an insight, caveat, or question.
Jang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: