Answers are grounded in this paper and cite their sources.
Purpose This study aims to compare the dyeing performance and environmental impact (effluent characterization and ecotoxicity) of a violet natural dye (Kerria lacca) with a trichromy of synthetic reactive dyes, both applied to cationized cotton yarns. Design/methodology/approach A two-stage approach was adopted, involving laboratory-scale optimization followed by industrial-scale application with generation of representative effluents, including a prior cationization step for the natural dye system to enhance fiber–dye affinity. Dyeing performance was evaluated using colorimetric parameters (K/S, ΔE*), dyeing kinetics, adsorption isotherms and color fastness (washing and rubbing). Environmental impact was assessed through physicochemical parameters (pH, COD, BOD and chlorides) and acute ecotoxicity using Daphnia magna, with calculation of the toxicity factor (TF). Findings The natural dye exhibited low color strength (K/S ≈ 1.7) and limited color reproducibility, with ΔE* values exceeding the industrial threshold of 1.5 and reaching 3.31 at production scale. In contrast, the reactive system showed greater stability and process control (ΔE* = 1.50). Reactive dyeing kinetics were better described by the pseudo-first-order model (R2 = 0.863), while the natural dye presented unstable behavior and weaker model fitting. These findings were supported by structural analyses (scanning electron microscope and Fourier Transform Infrared Spectroscopy), indicating predominantly surface-level dye fixation in the natural system. From an environmental perspective, the natural dye effluent showed lower inorganic load but high organic content (COD = 943 mg·L−¹; BOD = 809 mg·L−¹) and significantly higher ecotoxicity (TF = 64) compared to the reactive system (TF = 4). Originality/value This study provides an integrated industrial-scale evaluation of natural dye performance, combining technical, kinetic, structural and ecotoxicological analyses. The results highlight the gap between laboratory expectations and industrial performance, offering practical insights for process optimization and sustainable implementation of natural dyes in textile production. These results demonstrate that natural dyes remain limited under industrial conditions because of fixation instability and environmental variability.
No takes yet. Share an insight, caveat, or question.
Cunha et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: