Answers are grounded in this paper and cite their sources.
To address the demand for miniaturization and integration of traditional interferometric fiber optic gyroscopes (FOGs), this paper proposes a polarization beam splitter (PBS) based on a silicon nitride (Si3N4) strip waveguide, which consists of three directional couplers. The TE0 and TM0 modes are separated step by step using two cascaded bent directional couplers, while a straight directional coupler is introduced to compensate for the increased TE0 mode transmission loss caused by bent directional coupler #2. With a wider coupling gap design, a graded bending radius, and a mode field offset compensation scheme, this PBS has a footprint of approximately 75 μm × 25 μm and a minimum coupling gap of 0.6155 μm; in the 1.5–1.6 μm wavelength range, its insertion loss is <0.31 dB and its polarization extinction ratio is >22 dB. This design achieves an optimized balance among high performance, compact size, and high fabrication tolerance for the PBS. Meanwhile, we conducted structural simulations and parameter optimization for 1×2 and 1×3 multimode interference (MMI) beam splitters, which not only exhibit excellent spectral uniformity but also have insertion losses below 0.0985 dB and 0.169 dB, respectively, within the 1.5–1.6 μm wavelength band. Further simulations verified that the Si3N4 optical waveguide devices maintain excellent performance within typical process deviation ranges. All the aforementioned Si3N4 optical waveguide devices feature uniform waveguide dimensions and can be directly cascaded and integrated on a Si3N4 optical chip. The design and optimization of these Si3N4 optical waveguide devices provide a viable design solution for the miniaturization and integration of three-axis integrated FOGs.
No takes yet. Share an insight, caveat, or question.
Bao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: