Answers are grounded in this paper and cite their sources.
Wastewater pollution is a global challenge in the field of environmental remediation, and advanced oxidation processes using functional biochar catalysts are receiving increasing attention. In this study, a microcrystalline−amorphous catalyst (CCF 0.3) containing Fe2O3 microcrystalline structures was prepared from cellulose and ferric chloride hexahydrate via ball milling and low-temperature calcination for phenol degradation using activated hydrogen peroxide (H2O2) under light conditions. The results revealed that CCF 0.3 contained both Fe2O3 microcrystalline and amorphous structures, with clear grain boundaries between the two. Additionally, numerous spherical structures and abundant functional groups were observed on the surface of CCF 0.3, providing a large number of active sites. When the dosage of CCF 0.3 was 0.2 g/L and the concentration of H2O2 was 4 mM, 100% removal of 20 mg/L of phenol was achieved within 30 min. Cyclic experiments and X-ray photoelectron spectroscopy (XPS) comparative analyses showed that CCF 0.3 exhibited good stability. When applied to real water matrices, the phenol degradation performance of CCF 0.3 was reduced, particularly in river water, highlighting the influence of water matrix effects and the need for further optimization to improve its practical applicability. Quenching experiments, probe tests, and electron paramagnetic resonance (EPR) experiments confirmed that the main radical in the system was hydroxyl radicals (·OH), and a possible reaction mechanism was proposed. These findings highlight the potential of the microcrystalline−amorphous catalyst for efficient photo-Fenton removal of phenol, providing new ideas and solutions for the development of water treatment technologies and pollutant removal.
No takes yet. Share an insight, caveat, or question.
Lv et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: