Answers are grounded in this paper and cite their sources.
Focusing on the microscopic evolution mechanisms of the capillary barrier effect (CBE) in geotechnical engineering, this study employed microfluidics technology to design and fabricate three types of chips with distinct pore structures, simulating pure fine-grained, pure coarse-grained, and fine–coarse pore networks. By mimicking the random and irregular pore characteristics of natural porous media, the effects of flow velocity and pore structure heterogeneity on fluid percolation behaviour were investigated. The experimental results show that: (1) pore structure plays a decisive role in steady-state water saturation. Under identical flow velocities, the saturation at moment M3 of the three chip types follows the order: pure coarse-grained chip > pure fine-grained chip > heterogeneous double-layer chip. (2) Injection velocity and structural heterogeneity considerably affect water breakthrough behaviour. In the double-layered chip, the abrupt change in pore structure at the fine–coarse interface induces gas trapping, forming discontinuous bubble clusters that significantly delay the initial water breakthrough into the underlying coarse-grained layer. At a low flow rate (0.85 μl/min), the interface penetration time of the fine–coarse pore network chip is approximately twice that of the pure fine-grained chip. (3) Under low flow velocities, fluid flow tends to exhibit typical fingering patterns. Conversely, under high flow velocities, viscous forces dominate, and the fluid advances as a uniform displacement front.
No takes yet. Share an insight, caveat, or question.
郝冬雪 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: