Answers are grounded in this paper and cite their sources.
Decreasing Ir catalyst loading and increasing its utilization are key focuses of the proton exchange membrane water electrolyzer (PEMWE) industry. In the context of keeping anode Ir loading low (<0.25 mg/cm 2 ), this study develops a porous transport electrode (PTE) configuration by fabricating an electroplated Pt-based nanodendritic surface on a sintered porous transport layer (PTL) for Ir catalyst sputter deposition. Such an ink-free PTE configuration is then compared with the IrO x ink-based anode catalyst-coated membrane (CCM) and PTE configurations with similar Ir loading. Nano-dendritic Pt surface on PTL led to improved oxygen evolution reaction (OER) kinetics and lower ohmic losses during PEMWE operation. After 300 h of accelerated stress testing (AST), the surface-engineered PTE configuration demonstrated better durability, with a 7.9% increase in output voltage at 2.0 A/cm 2 and a 13.9% increase in high-frequency resistance (HFR). In contrast, higher voltage degradation (12.2%) and HFR increase (22.1%) were observed for the CCM configuration. Post-AST SEM analysis revealed loss of structural integrity in the CCM configuration, with cracks and delamination in the catalyst layer. These results highlighted the capability of an ink-free, nano-dendritic, surface-engineered PTE configuration for high electrical conductivity, HFR stability and improved OER kinetics with low Ir loading in PEMWE operation.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: