Answers are grounded in this paper and cite their sources.
Pretreatment is widely reported to improve asphaltene-derived carbon fiber performance, yet its intrinsic effect remains difficult to isolate because prior studies often vary melt-spinning conditions, fiber diameter, and thermal history simultaneously. Here, this ambiguity is resolved through a viscosity-matched melt-spinning protocol in which five asphaltene precursor variants are processed at identical melt viscosities (40–50 Pa·s), producing carbon fibers with statistically indistinguishable diameters of ∼14 μm. Rheometry, TGA-FTIR gas evolution analysis, NMR, FTIR, and GPC show that pretreatment results in measurable changes in precursor composition and molecular characteristics, with particularly pronounced effects on melt rheology and processability. At matched diameters, pretreatment increases average tensile strength from 534 MPa in untreated feedstock to 718 MPa, while Weibull analysis confirms corresponding changes in characteristic strength and tensile failure variability. The 380N pretreatment also enables stable spinning of finer carbon fibers (7.5 μm), yielding an average tensile strength of 1050 MPa, associated with the combined effects of precursor modification and finer fiber production. CHN analysis, XRD, Raman spectroscopy, and SEM-EDS reveal that substantial heteroatom content and structural disorder persist after carbonization, with no decisive pretreatment-induced enhancement in carbon ordering; correspondingly, tensile modulus remains within 48–54 GPa. Residual maltenes are further identified as an important source of interstudy variability through their effects on rheology and stabilization behavior. These findings establish pretreatment as a processability-driven route for improving asphaltene-derived carbon fibers, rather than a direct pathway to substantial structural development.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: