Answers are grounded in this paper and cite their sources.
Nanoparticles have emerged as promising candidates to simultaneously enhance oil recovery efficiency and promote in situ partial upgrading of bitumen through selective asphaltene adsorption. This study integrates an emulsion-based CoFe2O4 nanofluid with a three-dimensional sandpack physical model to investigate nanoparticle transport, thermal performance, oil recovery efficiency, and produced-oil quality under steam-assisted gravity drainage (SAGD) conditions. We first investigated three carrier systems (emulsion-, oil-, and water-based) to identify the most effective dispersion medium for CoFe2O4 nanoparticles. Because the sand matrix contains iron-bearing minerals, CoFe2O4 nanoparticles, synthesized via thermal decomposition, were selected for their high asphaltene adsorption affinity and cobalt content, which served as an elemental tracer to quantify nanoparticle distribution. Three nanofluid injection strategies (preinjection, mid-injection, and coinjection with steam) were then evaluated against nanoparticle-free baselines. Thermal performance was assessed using axial temperature profiles and thermogravimetric analysis (TGA) of postexperiment sands, while recovery efficiency was evaluated using the ultimate oil recovery factor and the cumulative steam–oil ratio (cSOR). Oil quality was characterized using asphaltene content, CHNS elemental analysis, 1H NMR, MALDI-TOF mass spectrometry, and rheological measurements. The emulsion-based carrier provided the deepest and most homogeneous nanoparticle penetration across all sand layers. Coinjecting the emulsion-based nanofluid with steam achieved the highest recovery (89% at 12 PVI vs 67% for pure steam-only), reduced cSOR by 10%, and produced the highest degree of viscosity reduction (DVR) of 62.9% compared to a conventional SAGD experiment. Asphaltene analyses supported preferential retention of heavier fractions in the porous medium, as evidenced by MALDI-TOF shifts toward lower molecular weights and TGA evidence of spatially distributed heavy organic retention. These results highlight that optimizing both the carrier system and the injection strategy is critical to maximizing nanoparticle-assisted SAGD recovery and bitumen partial upgrading via in situ asphaltene capture.
No takes yet. Share an insight, caveat, or question.
Prada et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: