Answers are grounded in this paper and cite their sources.
This study investigates the feasibility of identifying gate oxide degradation using a convolutional neural network (CNN) trained with gate current waveforms. A simplified metal–oxide–semiconductor field-effect transistor (MOSFET)-based discussion is first provided to relate changes in oxide/interface states to the input-capacitance-gate-voltage characteristics, and hence, to transient gate current waveforms. A healthy 1.2-kV silicon carbide (SiC) MOSFET and an aged device subjected to high-temperature gate-bias stress were prepared. Gate current waveforms were obtained via double-pulse tests under different input voltages, load currents, and case temperatures. Each validation case was repeated ten times using different random seeds. The turn-off gate-current waveforms achieved mean classification accuracies of 99.8% and 99.5% in the leave-one-voltage-out and leave-one-current-out validations, respectively. They also generally exhibited less variability between runs than the turn-on waveforms. Gradient-weighted class activation mapping (Grad-CAM) visualization indicated that the CNN primarily used waveform intervals corresponding to the negative gate–source-voltage region, where the measured difference in the C iss - V GS characteristics between healthy and aged devices was large. These results demonstrate the potential of CNN-based gate-current condition monitoring for identifying gate oxide degradation states in SiC MOSFETs.
No takes yet. Share an insight, caveat, or question.
Amano et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: