Answers are grounded in this paper and cite their sources.
Purpose This study aims to improve the Rockwell hardness (HRM) and Charpy impact strength of acrylonitrile styrene acrylate (ASA) parts fabricated using fused deposition modeling. An integrated experimental–computational framework was developed to identify response-specific optimal printing conditions. Findings Statistical analysis indicated that layer height (LH) had the strongest influence on both responses, followed by infill density (ID) and build orientation BO, while print speed (PS) and extrusion temperature (ET) exhibited nonlinear effects. The regression models were statistically significant and showed satisfactory predictive performance within the investigated domain, with (R2) values of at least 97%. The response-specific optimizations produced nearly identical conditions: LH = 0.10 mm, PS ˜ 49 mm/s, RA = 0°, ET ˜ 248 °C, FS = 0%, BO = 0° and ID = 80%. Confirmation experiments produced hardness and impact-strength values close to the corresponding model predictions. Qualitative scanning electron microscopy observations showed fracture and interlayer features consistent with the measured mechanical responses. Originality/value This study presents an integrated definitive screening design–golden jackal optimization framework for the response-specific optimization of hardness and impact strength in FDM-printed ASA. The approach enables efficient screening of multiple process parameters and identification of favorable printing conditions using a limited experimental design, offering a practical method for improving the mechanical performance of engineering thermoplastics in material-extrusion additive manufacturing.
No takes yet. Share an insight, caveat, or question.
Khan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: