Answers are grounded in this paper and cite their sources.
Purpose Induction heating (IH) is a powerful heat source for additive manufacturing (AM) to provide localised contactless and energy-efficient melting of metal feedstocks. This study aims to achieve the optimal coil geometry to ensure uniform temperature distribution and effective melting during the IH of aluminium wire. Design/methodology/approach The performance of IH strongly depends on the coil geometry particularly the coil diameter, number of turns and turn spacing. Three diameters of coils (25 mm, 35 mm and 45 mm) of nine turns have been selected and examined at an excitation frequency of 100 kHz with output coil current varied from 200 A to 400 A (40 A per coil turn), for the desired outcomes. To attain optimum coil geometry, simulation and experimental study have been performed and validated. The simulation study has been conducted using COMSOL Multiphysics for the optimal coil geometry, and experimental validation for temperature distribution was accomplished through thermal imaging, processed in MATLAB. Moreover, the magnetic flux density validated through analytical calculation. Findings The findings of this study revealed that coil size has a considerable impact on thermal uniformity and heating rate. Moreover, the results showed the effectiveness of electromagnetic thermal coupling in achieving stable and uniform melting of AA5083 wire within a bi-material extruder. Originality/value This study provides quantitative coil-design approach for optimising induction-assisted wire-feed AM systems, highlighting the role of coil geometry in controlling magnetic flux distribution and temperature uniformity.
No takes yet. Share an insight, caveat, or question.
Suman et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: