Answers are grounded in this paper and cite their sources.
This study investigates the composition‐dependent mechanical, thermal, and dielectric properties of bioepoxy composites (BECs) incorporating epoxidized rapeseed oil (ERO) as a renewable modifier and granite powder as an inorganic geological reinforcement. The ERO content remains constant at 3.4 wt.%, while the granite concentration increases from 0 to 6.85 wt.% to elucidate the relationships between formulation, microstructure, and functional performance. The composites are characterized in terms of bulk density, Shore D hardness, tensile strength, elongation at break, dielectric constant, and thermal conductivity, complemented by Fourier‐transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and energy‐dispersive X‐ray spectroscopy (EDS). Increasing granite content raises the bulk density from 1130 ± 2 to 1167 ± 4 kg m −3 , the dielectric constant from 3.58 ± 0.07 to 3.98 ± 0.05, and the thermal conductivity from 0.110 ± 0.005 to 0.159 ± 0.009 W m −1 K −1 . In contrast, the mechanical response exhibits a non‐monotonic dependence on mineral loading. At 3.70 wt.% granite, the composite achieves maximum Shore D hardness and tensile strength values of 78.5 ± 0.5 and 30.5 ± 0.4 MPa, respectively. Further increasing the granite content to 6.85 wt.% reduces tensile strength to 24.7 ± 0.2 MPa, while elongation at break decreases from 8.2% ± 0.5% to 4.1% ± 0.2% across the investigated composition range. These findings highlight the potential of granite‐reinforced epoxy composites as tunable engineering materials, with an optimal filler content balancing mechanical performance and functional properties.
No takes yet. Share an insight, caveat, or question.
Ertürk et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: