Answers are grounded in this paper and cite their sources.
Carbon fiber reinforced polymer (CFRP) composites require improved fire safety, electrical performance, and damage tolerance for advanced structural applications. This study integrates experiments and multiphysics modeling of CFRP laminates modified with hybrid alumina nanoparticles (ANPs) and graphene nanoplatelets (GNPs) and fabricated by vacuum assisted resin infusion microwave curing (VARIMC). SA1 was unmodified, while SA2–SA5 contained 1/0.1 wt.%, 2/0.2 wt.%, 3/0.3 wt.%, and 4/0.4 wt.% ANP/GNP, respectively. The novelty lies in integrating VARIMC processed hybrid ANP/GNP CFRP with validated thermo‐mechanical modeling of fire induced temperature, heat flux and stress under 35 kW/m 2 heat flux. Simulated back surface temperatures showed an average absolute percentage error of 5.3% relative to infrared measurements. Compared with SA1, SA5 increased the time to ignition by 52% and reduced peak heat release rate, average heat release rate, and total heat release by 34.3%, 62.5%, and 46.3%, respectively, while increasing the flame retardancy index from 1.00 to 4.30. SA5 also exhibited the highest residual mass at 600°C and electrical conductivity of 0.76 S/m. SA3 achieved the highest apparent critical stress intensity factor of 12.72 MPa√m, 68.9% above SA1. Thus, SA3 provided optimum damage tolerance, whereas SA5 delivered superior fire, electrical, and thermal barrier performance.
No takes yet. Share an insight, caveat, or question.
Gupta et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: