Answers are grounded in this paper and cite their sources.
The thermal performance of photovoltaic (PV) modules strongly influences their electrical efficiency, particularly under high solar irradiance conditions. This study experimentally investigates the effectiveness of active and passive cooling strategies for PV modules under real outdoor conditions. Three configurations were evaluated: active water cooling using a cold-plate system (Model I), passive evaporative cooling using a wet tissue layer (Model II), and an uncooled reference module (Model III). All systems were tested simultaneously under identical environmental conditions to enable direct and fair performance comparison. The results show that both cooling methods effectively reduce PV module operating temperature, improving electrical performance. The active water-cooling system achieved the largest temperature reduction, up to 25 °C, resulting in a maximum efficiency of about 12.6%. The passive evaporative system reduced the temperature by about 13 °C, with a corresponding efficiency of about 12.2%, demonstrating a viable, low-cost, energy-efficient alternative. A thermo-hydraulic analysis revealed that the water-cooling system operated under a fully laminar flow regime (Re ≈ 106), with a moderate convective heat transfer coefficient and negligible pumping power, yet sufficient heat removal capacity to suppress thermal accumulation. This study provides a systematic experimental benchmark for comparing PV cooling strategies under identical outdoor conditions and highlights the trade-off between cooling effectiveness and system simplicity. The findings offer practical insights for designing and deploying photovoltaic thermal management systems, particularly in hot-climate regions and building-integrated photovoltaic (BIPV) applications.
No takes yet. Share an insight, caveat, or question.
Siricharoenpanich et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: