Answers are grounded in this paper and cite their sources.
Joint defects are common discontinuous structures in subway tunnel engineering and significantly affect the stability of surrounding rock masses. Jointed rock models with different sizes and joint orientations were established using the discrete element method (DEM), and uniaxial compression tests were conducted. The effects of joint orientation and model size on the mechanical properties, failure modes, and microcrack evolution were systematically investigated. The results indicate that the mechanical behavior of jointed rock masses exhibits pronounced size effects and anisotropic characteristics. Rock masses containing vertically oriented joints exhibit relatively higher strength and elastic modulus, whereas those with horizontally oriented joints demonstrate comparatively weaker mechanical performance. As the model size increases, both the strength and elastic modulus decrease, revealing a typical size effect. The failure mode is jointly controlled by joint orientation and model size. In small-sized models, failure is primarily characterized by through-going cracks propagating along the principal stress direction, and the influence of joint orientation is relatively limited. With increasing model size, the failure mode gradually evolves from localized crack coalescence to dispersed cracking. Moreover, crack propagation behavior varies significantly with joint orientation. In rock masses with vertical joints, cracks predominantly propagate along the principal stress direction, whereas in specimens with horizontal joints, cracks develop both along the joint plane and the direction perpendicular to the joint. Rock masses containing horizontal joints generate a larger number of microcracks and experience more severe damage, while those with vertical joints develop fewer cracks that mainly propagate along the joint orientation. As the model size increases, the total number of microcracks decreases and their spatial distribution becomes increasingly dispersed. These findings provide a theoretical basis for evaluating the stability of jointed surrounding rock in subway tunnel engineering.
No takes yet. Share an insight, caveat, or question.
Qiu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: