Answers are grounded in this paper and cite their sources.
Carbon-fiber-reinforced polymer (CFRP) is a lightweight, high-strength, and corrosion-resistant alternative for suspension bridge main cables, but its lower axial stiffness may alter the global response of a self-anchored system. This study investigates a three-span self-anchored suspension bridge with a span arrangement of 130 + 336 + 130 m. A steel main cable was replaced with a CFRP main cable of comparable nominal tensile capacity, and three-dimensional finite-element models were used to compare completed-bridge and service-stage responses. The effects of the sag-to-span ratio, side-to-main-span ratio, anchor-span length, CFRP elastic modulus, and tensile strength were then evaluated. Relative to the steel main cable scheme, the CFRP scheme reduced the maximum main cable tension and compressive axial force in the stiffening girder by 4.24% and 3.61%, respectively, but increased the completed-bridge maximum positive girder moment by 28.04%. Under live load, the maximum positive girder moment and vertical deflection increased by 1.63% and 7.63%. Geometric parameters altered cable horizontal force and end rotational restraint, whereas CFRP elastic modulus and tensile strength affected the axial stiffness EA through different mechanisms. These comparative numerical results suggest that tensile capacity, axial stiffness, and system geometry should be considered jointly in the structural design of self-anchored suspension bridges with CFRP main cables.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: