Answers are grounded in this paper and cite their sources.
To investigate the effects of high-temperature heat treatment on the physicochemical properties of three rosewood species, Pterocarpus macrocarpus Kurz, Dalbergia latifolia Roxb. and Dalbergia cochinchinensis Pierre, the wood was subjected to heat treatment at 140, 160, and 180 °C. This study systematically evaluated how treatment temperature influences the materials, particularly with respect to color parameters, dimensional stability, chemical structure, and mass loss rate. The results showed that the mass loss rate (ML) of the three rosewood species increased with an increase in temperature. As the treatment temperature increased from 140 °C to 180 °C, the ML increased from 0.45% to 2.78% for P. macrocarpus, from 0.51% to 2.29% for D. latifolia, and from 0.33% to 1.92% for D. cochinchinensis. The wood color of the three rosewood species continued to deepen with the increase in temperature. The maximum change in lightness (ΔL*) was −10.20 for P. macrocarpus, while the smallest was −5.49 for D. latifolia. Notably, the Δb* value of P. macrocarpus shifted from positive to negative, indicating a shift toward a less yellow hue, which differed from the synchronous decrease in both redness and yellowness observed in the other two species. The moisture absorption (MA) and swelling rate of the three rosewood species decreased after high-temperature treatment, while the moisture excluding efficiency (MEE) and the anti-swelling efficiency (ASE) exhibited an upward trend. Compared with the untreated control, the MA at 180 °C decreased from 6.61% to 4.58% for P. macrocarpus, from 6.81% to 4.21% for D. latifolia, and from 5.43% to 3.43% for D. cochinchinensis. At 180 °C, the ASE was observed in D. latifolia (39.16%), followed by P. macrocarpus (35.55%) and D. cochinchinensis (23.66%). Infrared spectroscopy analysis showed that the hydroxyl peak at 3339 cm−1 and hemicellulose acetyl peak at 1732 cm−1 became less prominent after heat treatment, consistent with a reduction in hydrophilic functional groups that contributed to the enhanced dimensional stability. Following heat treatment at elevated temperatures, the rosewood became noticeably darker and its MA capacity decreased markedly, while its dimensional stability improved progressively with treatment temperature, particularly at the higher treatment temperatures. This study provides a theoretical basis for optimizing the heat treatment process of rosewood and offers technical support for broadening its sustainable utilization.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: