Answers are grounded in this paper and cite their sources.
In this study, the effect of inlet-gas preheating on plasma characteristics and NO x formation was investigated in an electrodeless MW plasma operated with N 2 -O 2 mixtures at atmospheric pressure. The inlet gas was preheated at most by 200 K while flow rate varied from 30 to 50 slpm at a fixed MW power (1.5 kW). The rotational temperatures of plasma were diagnosed by optical emission spectroscopy, and the post-plasma region was analyzed using imaging of plasma plume, thermocouple measurements, and Fourier-transform infrared spectroscopy. The temperature of plasma generally decreased slightly with increasing flow rate, suggesting that the plasma volume expanded and a large portion of the flow passed through the plasma. As the preheating temperature increased, the decrease in gas density elevated the volumetric flow rate, enhancing the mixing of the flow passing through the plasma region with the surrounding bypass flow. The enhanced quenching led to a steeper axial temperature gradient and a shorter plasma plume. The maximum NO x concentration was obtained at the lowest flow rate and the highest preheating temperature, whereas the minimum energy cost (2.73 MJ mol -1 ) was achieved at the highest flow rate and the highest preheating temperature. The increase in NO x concentration and the reduction in energy cost were approximately 6-7%, which is notable considering that the studied conditions cover at most 14.75% of the available heat recovery. Additionally, reactor network simulations were performed to analyze the effects of inlet-gas preheating on NO x formation. Considering that most NO x formation occurred immediately downstream of the plasma region, the plasma region enlarged by preheating ultimately increased the NO x yield.
No takes yet. Share an insight, caveat, or question.
Ahn et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: