Answers are grounded in this paper and cite their sources.
Vacuum-channel transistors (VCTs) are attractive for high-frequency and radiation-tolerant electronics because electron transport through the vacuum channel is largely ballistic. However, in conventional single-gate architectures, the same gate field participates in both electron extraction and trajectory control, creating a trade-off between efficient anode collection, gate interception, and current saturation. These limitations can restrict their performance in high-frequency amplification. Here, we numerically investigate a VCT incorporating a 45°-tilted cathode and a staggered dual-gate geometry. The tilted emission surface redirects the initial electron trajectories toward the anode, while the staggered gate geometry provides spatially separated control of electron extraction and downstream transport. Under the selected operating conditions, the simulated device exhibits a low-current onset region, a rapid-growth region, and a high-Va reduced-slope transport regime together with a gate-interception ratio below 0.041% in the identified low-gate-interception operating region. Large-signal simulations further yield positive power gain at the investigated frequencies up to 500 GHz, including 7.6 dB at 50 GHz and 4.6 dB at 500 GHz. At 50 GHz, the calculated power-added efficiency (PAE) reaches 34.1%. The results show that cathode-angle engineering combined with spatially distributed gate control can reduce electron interception while retaining positive simulated power gain at sub-THz frequencies.
No takes yet. Share an insight, caveat, or question.
Tang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: