Answers are grounded in this paper and cite their sources.
Easy-to-handle and dosage-controllable adhesive films are promising alternatives to traditional liquid adhesives, but their practical applications are limited by the trade-off among cohesive strength, interfacial wettability, and water-resistant bonding performance. Herein, a simple yet effective strategy using sodium citrate as a functional mediator was developed to enhance the physicochemical, wetting, and adhesive properties of conventional poly(vinyl alcohol)/chitosan (PC) films for wood bonding. Upon immersion (∼5 s), citrate ions modified the intermolecular interactions and local hydration environment, regulated chain-segment mobility to promote film spreading, and provided reactive sites for hot-pressing, during which a network coupling covalent cross-linking with hydrogen bonding was established. Optimized PC5 films containing 5 wt % chitosan imparted hot water, cold water, and dry bonding strengths of 1.02, 1.28, and 1.81 MPa, respectively, to three-layer poplar plywood under optimal conditions (120 °C, 1.0 MPa, 4 min), far exceeding pure poly(vinyl alcohol) (PVA) films that failed after 63 °C water soaking. This strategy also enabled robust bonding of eucalyptus and multilayer plywood, with five-layer plywood performing best. Moreover, PC5 films exhibited enhanced mechanical properties (73.7 MPa tensile strength; 462.2 MPa Young’s modulus), outperforming PVA and other biobased counterparts, while offering competitive sustainability, bonding performance, and storage stability relative to common commercial adhesives. This facile and energy-efficient approach expands the utility of biodegradable films for eco-friendly wood panel manufacturing.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: