Answers are grounded in this paper and cite their sources.
Continuous copper rod manufacturing is highly sensitive to upstream process instability, yet Lean Six Sigma research has rarely examined continuous metallurgical processes. This study evaluates the effectiveness of Value Stream Mapping (VSM) in reducing waste and enhancing operational performance in the upstream Continuous Casting and Rolling (CCR) process of a Malaysian copper manufacturer. An industrial case study was conducted using VSM as the primary analytical tool, supported by the Define, Measure, Analyse, Improve and Control (DMAIC) framework. SAP production records, including coil-by-coil rod reports, were cross-validated against SCADA data and shop-floor observations to map the current state, quantify value-added time, prioritise defects using Pareto and Ishikawa analyses, and evaluate Overall Equipment Effectiveness (OEE). Five targeted Kaizen interventions were implemented across the Loader, Melting Furnace, Casting Wheel, Rolling Mill and Coiler workstations. A comparison between the baseline (Week 10, 718 coils) and post-improvement (Week 41, 673 coils) periods revealed a statistically significant 17% relative reduction in the copper rod downgrade rate (31.34% to 26.00%; p = 0.028), alongside an increase in OEE from 63.49% to 67.58%, primarily driven by improved quality performance. The Future State VSM projected a 40% reduction in production process lead time, from 32.02 to 19.21 hours. Chemical-impurity downgrades decreased from 16.7% to 3.0% following material verification at the Loader, while pallet-related defects were eliminated at the Coiler. However, oxygen-, surface- and peeling-related defects increased. Based on copper prices and exchange rates matched to the respective assessment dates, the estimated 139.9 tonnes of weekly downgrades avoided represent an economic benefit of RM 0.15–0.30 million, after accounting for market price fluctuations. Given the single-site design, longer-term performance monitoring and multi-site validation are recommended.
No takes yet. Share an insight, caveat, or question.
Rahman et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: