Answers are grounded in this paper and cite their sources.
To improve the hydrogen barrier protection performance of pipeline steel used in hydrogen transmission pipelines, this study designs epoxy resin (EP) composite coatings of different structures, including pure epoxy coatings, epoxy/graphene bilayer coatings (EP/GC), and two types of EP/GC/EP three-layer sandwich structure coatings. The effects of the coating structure on hydrogen barrier performance, interfacial bonding strength, and corrosion resistance were systematically studied. The results show that the hydrogen barrier performance of the three-layer sandwich structure coating is significantly superior to that of the two-layer and pure epoxy coatings. Among them, the EP/GC/EP three-layer coating has the lowest effective hydrogen diffusion coefficient of 4.08 × 10−8 cm2/s, about 95% lower than that of the X80 steel matrix, and the hydrogen permeability reduction coefficient (PRF) reaches 25.51. Adhesion tests showed that the double-layer coating had the highest bonding strength, reaching 19.6 MPa, while the three-layer coating decreased (10–11 MPa) due to increased interlayer interfaces. The electrochemical test results showed that the three-layer coating had the most positive self-corrosion potential (−0.37 V) and the lowest self-corrosion current density, demonstrating optimal corrosion resistance. The multilayer coating prepared in this study combines low cost, good adhesion, and excellent hydrogen resistance and corrosion resistance, providing an experimental and theoretical basis for the structural design of high-resistance hydrogen coatings on the inner walls of hydrogen transmission pipelines.
No takes yet. Share an insight, caveat, or question.
Pan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: