Answers are grounded in this paper and cite their sources.
Fragrance is a commercially decisive ingredient of detergents, but its volatility limits the scent that survives storage, washing and drying. Melamine–formaldehyde (MF) microcapsules are widely used to address this problem, yet suitable processing conditions depend on the emulsifier and on the fragrance. Here, a commercial synthetic jasmine fragrance was encapsulated in MF shells by in situ polymerization using technical-grade reagents. Twelve candidate emulsifiers and additives were screened under a fixed, non-acidified protocol, and six process parameters were then varied one factor at a time. Capsule formation depended on the interplay between the emulsifier and acid-catalyzed polycondensation: Tween 20 (HLB 16.7) gave no capsules without acidification but formed closed-shell capsules once the pH was lowered with citric acid. The selected processing window was pH 4, 60 °C, 4000 rpm, an MF:fragrance mass ratio of 1:2, prepolymer synthesis at 60 °C and an encapsulation time of ≥3 h (5 h adopted). SEM image analysis showed spherical capsules with a number-mean diameter of 1.32 ± 0.23 µm (n = 143). The fragrance absorbance at 360 nm in the aqueous phase decreased from 1.92 to the baseline level after encapsulation, corresponding to an apparent encapsulation efficiency of at least 96.8%. In a qualitative ambient test, the capsules released fragrance spontaneously over about four days, whereas commercial fragrance beads did not, indicating that the shell must be strengthened before mechanically triggered release can be achieved.
No takes yet. Share an insight, caveat, or question.
Thi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: