Answers are grounded in this paper and cite their sources.
Coherent Doppler wind LiDAR (DWL) has become an effective remote-sensing tool for continuous wind profile measurements in the atmospheric boundary layer. However, its field reliability and long-term observational performance under different meteorological conditions still require systematic validation. We evaluated the field performance of a commercial TAW-01 coherent Doppler wind LiDAR manufactured by Anhui Zhongke Tian’an Technology Co., Ltd., through comparison experiments with a meteorological gradient tower in Shenzhen and GTS14 radiosonde observations in Anqing from 2023 to 2025. The instrument retrieves wind profiles within a nominal measurement height range of 50 to 3500 m using velocity–azimuth display scanning. Compared with the meteorological gradient tower, the LiDAR showed good agreement in 10-min averaged horizontal wind speed and wind direction at five height levels. Averaged across these heights, the root mean square error (RMSE) for horizontal wind speed was 0.3268 m/s, with a mean correlation coefficient of 0.9793. For wind direction, the mean bias and RMSE calculated from circular angular differences were −1.9408 and 4.6918 deg, respectively. For four representative radiosonde comparisons, the RMSE values of horizontal wind speed and wind direction ranged from 0.627 to 0.848 m/s and from 4.302 to 9.307 deg, respectively. An expanded statistical comparison incorporating additional radiosonde observations showed altitude-dependent wind speed RMSE values of 0.7 to 2.2 m/s, with better agreement generally observed below 2.0 km. Long-term observations over Beijing from January to August 2025 revealed distinct monthly, vertical, and seasonal variations in the boundary layer wind field. A typical weather event from March 14 to 16, 2025, further demonstrated the capability of the system to capture airflow convergence, downdraft evolution, wind direction shear, and precipitation-related wind field changes. These results support the applicability of the TAW-01 DWL for boundary layer wind profile monitoring and related meteorological and engineering applications under conditions with sufficient aerosol backscatter.
No takes yet. Share an insight, caveat, or question.
Xia et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: