Answers are grounded in this paper and cite their sources.
Additively manufactured structural composites exhibit geometry-dependent responses that require both accurate prediction and defensible validation. This study develops a robustness-aware explainable machine-learning framework for apparent modulus of elasticity (MOEapp), modulus of rupture (MOR), and nominal maximum section shear stress (τmax) of extrusion-printed PrinTimber composite beams. An ABAQUS finite-element framework benchmarked against single- and two-layer beams was extended to 100 configurations spanning 1–10 layers, widths of 42 mm and 84 mm, and span-to-depth ratios (S/D) of 6–30. Because span-to-width ratio is an exact deterministic function of the primary geometry, the analysis uses the independent predictor set [layer count, width, S/D]. Seven surrogates—linear regression, quadratic response-surface modeling, Random Forest, artificial neural network, XGBoost, LightGBM, and Gaussian-process regression—were compared under nested cross-validation with matched tuning budgets. XGBoost gave the highest out-of-fold R2 for all three responses: MOEapp (0.964), MOR (0.702), and τmax (0.836). Across 50 repeated holdouts, it remained most stable for MOEapp (0.941 ± 0.042) and τmax (0.833 ± 0.119), while MOR stayed partition-dependent. Repeated SHAP over 50 partitions identified S/D as dominant for MOEapp (76.4%) and τmax (74.5%) and coupled layer-count/S/D control for MOR. A local ±20% cohesive-parameter perturbation changed predicted ultimate load by, at most, 2%. The framework supports interpretable screening within the modeled design domain while separating numerical-surrogate accuracy from experimental generalization.
No takes yet. Share an insight, caveat, or question.
Hematabadi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: