Answers are grounded in this paper and cite their sources.
This paper presents a guide-pulley-free, staggered cable-driven reduction mechanism for an elbow exoskeleton and other limited-rotation assistive devices. The design uses a motor, a small helical-groove shaft, one continuous cable, and a single integrated sector-shaped output part. The cable wraps around the small shaft about six times, and its two ends travel directly to two height-offset arc grooves on the sector part, so that the two cable segments cross when viewed from above without touching. No guide pulley, tensioning pulley, slider, or spring appears anywhere in the cable path. The small shaft has an effective diameter of 18 mm and the sector output part an effective diameter of 210 mm, giving a theoretical reduction ratio of about 11.67:1. Cable tension is set by wrapping and clamping each cable end onto a screw fixed on the sector part, eliminating any separate tensioning component. The small shaft is printed in carbon-fibre-reinforced PLA and the remaining structure in PLA by additive manufacturing. A working prototype has been built and tested for basic function, verifying bidirectional motor rotation, a 160-degree output range, and stable cable tension during motion; output torque, efficiency, weight, noise, and fatigue life remain to be measured.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: