Answers are grounded in this paper and cite their sources.
Rolling motion integrates translational and rotational motion, rolling constraints, and rigid-body kinematics, yet undergraduate laboratory activities rarely allow multiple reference-point trajectories to be compared within the same rolling system. This study develops and mechanically validates a low-cost asymmetric two-wheel apparatus for investigating the turning radii of the inner wheel, outer wheel, axle midpoint, and centre of mass. A unified kinematic formulation defines these radii in the horizontal rolling plane while accounting for the projected axle length and the mass-dependent centre-of-mass position. Seven apparatus configurations were tested in five repeated releases each (35 trials). The four trajectory diameters were determined independently from floor-referenced physical measurements, yielding 140 experimental radius measurements. No inner-wheel, axle-midpoint, or centre-of-mass radius was reconstructed from the measured outer-wheel trajectory. Mean percentage errors were 4.40%, 3.39%, 1.64%, and 2.76% for the inner wheel, axle midpoint, centre of mass, and outer wheel, respectively, with relative standard deviations below 1.7%. The independently determined wheel trajectories also verified R 2 − R 1 = L c o s θ , with discrepancies below 0.65% for all configurations. Constructed from inexpensive cardboard wheels and a wooden-skewer axle, the apparatus provides an accessible and reproducible platform for investigating reference-point-dependent rolling kinematics. A classroom implementation framework is proposed, while learning effectiveness remains to be evaluated separately.
No takes yet. Share an insight, caveat, or question.
Wibowo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: