Answers are grounded in this paper and cite their sources.
Autonomous microrobots face an energy-density bottleneck because onboard batteries must simultaneously power sensing, control, and actuation. This work decouples the driving energy from the control energy: high-specific-energy methanol assumes the main energy supply, while a low-power electronic channel provides programmable control. We present a milligram-scale catalytic combustion thermal actuator in which methanol catalytic combustion heats a shape memory alloy (SMA) actuator, and a piezoelectric bimorph micro-valve modulates fuel vapor flux to regulate the output frequency. An arc-shaped SMA strip fabricated by high-temperature secondary shape-setting achieves a geometric equivalent contraction ratio of 16.6%, with an optimal release curvature of 0.226 mm−1 identified through an equivalent-stiffness criterion. A sliding interdigitated gas valve and catalytic-layer height optimization achieve a temperature window of <50 °C (closed) to >80 °C (open). The 392 mg prototype operates continuously for >15 min on 45 mg of methanol and completes 59 identifiable cycles. Active piezoelectric valve control enables programmable thermal oscillation at 0.05–0.3 Hz, and application to a surface-paddling microrobot achieves a forward speed of ≈4 mm s−1. By scheduling hundred-milliwatt-level chemical heat flow with a milliwatt-level control channel, this actuator offers a demonstrable pathway for integrating high-specific-energy fuels and programmable control in microrobots.
No takes yet. Share an insight, caveat, or question.
Jia et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: